Heating cable for electric floor heating, without thermostat | RAYCHEM T2Black-12 R-BK-B-46.0M-565W/T0 SZ18300321

RAYCHEM T2Black-12 is a 12 W/m floor heating cable ideal for electric floor heating under ceramic tile, marble, as well as under laminate, vinyl and wood floors. Factory-terminated with a 2.5-meter power cord, the T2Black-12 provides easy installation. The cable comes on a spool in a sturdy and handy package that includes hot-melt adhesive and a protective tube for sensor installation. Ideal for professionals looking for a reliable and easy-to-install heating system.

• Universal application - Ideal for any type of room, especially where heating mats are unsuitable due to irregular or complicated shapes.
• Main heating source - Can be installed over the entire floor surface, providing effective heating of the room.
• Fast heating - Nominal power of 12 W/m allows the floor to be heated quickly.
• Easy installation - Power supply from one side and factory termination with a 2.5-meter cable make installation easy.
• Thin - At 4 mm thin, it fits perfectly in the adhesive layer under the tiles.
• Shower safe - Can be installed even in walk-in showers.
• Hot melt adhesive included -Included in the package is hot melt adhesive with enhanced adhesion, making installation quick and easy.
• Quality warranty - The warranty covers the repair of the heating cable in the floor, with full restoration in case of a manufacturing defect.

Installation recommendations:

• Floor tiles - The heating cable should be laid directly in the adhesive layer under the tiles. It is important that the cable is carefully taped, without leaving air spaces. It is recommended to lay the cable at 80 mm intervals, which allows to achieve an efficiency of 150 W/m².
• Large floor tiles, natural stone, marble - The heating cable should first be poured with a layer of self-leveling screed with a minimum thickness of 5 mm (measured from the top of the cable). Only after this step can you proceed to gluing large tiles. It is recommended to lay the cable at intervals of 80 mm, which allows you to achieve an output of 150 W/m².
• Under floor panels, vinyl panels, linoleum, wood floors - the heating cable should be poured with a layer of self-leveling screed with a minimum thickness of 15 mm. For these floors, the power of 100 W/m² should not be exceeded, and the cable is recommended to be laid at 120 mm intervals. It is also necessary to provide control by means of a thermostat with a floor temperature sensor, limited to 27 - 28°C.
• On wooden OSB - On wooden OSB, first apply a layer of cement-based adhesive with a minimum thickness of 2 mm. After the glue has dried, continue the installation according to the above instructions for the type of floor finish you have chosen.
• In anhydrite or self-levelling screed - a cable with this heating power works best in screeds 15 - 30 mm thick.

Package contents:

• Packaging with easy roll-out system.
• Heating cable.
• floor thermostat NRG-DM, wired floor temperature sensor (optional according to the selected variant).
• fusible glue.
• installation pipe of the floor temperature sensor.
• brass pipe cap.
• instructions with acceptance protocol.
• information sticker.

Choose a promotional set with NRG-DM thermostat, which is very popular among our customers.

• Intelligent control - RAYCHEM NRG-DM thermostat controls electric floor heating, providing maximum comfort with minimum energy consumption.
• Versatile modes - Allows operation in three modes:
• Constant Mode - Maintains one constant temperature that can be easily changed using the + or - buttons.
• Event Mode - Operates according to a weekly schedule, minimizing energy consumption.
• Boost Mode - Allows the temperature to rise temporarily, then returns to the last mode.
• Advanced Sensors - Equipped with an ambient and floor temperature sensor, it offers 4 different control modes depending on the user's needs.
• Large LCD Display - Clear screen with blue backlight (100 x 64 pixels) allows easy reading and adjustment of settings.
• Adaptive function - The thermostat calculates when to start heating to reach the desired temperature, saving energy.
• Child lock - Protects against accidental changes to the thermostat settings.
• Display personalization - Customizable display of information such as set temperature, actual temperature, time and date, as well as turning the screen saver on or off.
• Energy monitoring - Visualizes energy consumption at various times, allowing you to control and save money.
• Temperature calibration - Adjusts to the specific floor design in the room.
• Protection of sensitive floors - Temperature scale with the ability to limit the thermostat to Min-Max values, ideal for wood and linoleum floors.
• Languages supported: English, German, Dutch, French, Russian, Lithuanian, Polish, Czech, Swedish, Finnish, Norwegian.