RAYCHEM R-BK-B-20.0M-250W/NRG - Heating cable for electric floor heating T2Black-12 W/m / 20.0 m / 250 W - NRG-DM thermostat included (SZ18300310)

RAYCHEM T2Black-12 is a 12 W/m floor heating cable ideal for electric floor heating under ceramic tile, marble, as well as under laminate, vinyl and wood floors. Factory-terminated with a 2.5-meter power cord, the T2Black-12 provides easy installation. The cable comes on a spool in a sturdy and handy package that includes hot-melt adhesive and a protective tube for sensor installation. Ideal for professionals looking for a reliable and easy to install heating system.

• Universal application - Ideal for any type of room, especially where heating mats are unsuitable due to irregular or complicated shapes.
• Main heating source - Can be installed over the entire floor surface, providing effective heating of the room.
• Fast heating - Rated power of 12 W/m allows the floor to heat up quickly.
• Easy installation - Power supply from one side and factory-terminated 2.5-meter cable make installation easy.
• Thin - At 4 mm thin, it fits perfectly in the adhesive layer under tiles.
• Shower safe - Can be installed even in walk-in showers.
• Hot melt adhesive included - Included in the package is hot melt adhesive with enhanced adhesion, making installation quick and easy.
• Quality warranty - The warranty covers the repair of the heating cable in the floor, with full restoration in case of a manufacturing defect.

Installation recommendations:

• Floor tiles - The heating cable should be laid directly in the adhesive layer under the tiles. It is important that the cable is carefully taped, without leaving air spaces. It is recommended to lay the cable at 80 mm intervals, which allows to achieve an efficiency of 150 W/m².
• Large floor tiles, natural stone, marble - The heating cable should first be poured with a layer of self-leveling screed with a minimum thickness of 5 mm (measured from the top of the cable). Only after this step can you proceed to gluing large tiles. It is recommended to lay the cable at intervals of 80 mm, which allows to achieve an efficiency of 150 W/m².
• Under floor panels, vinyl panels, linoleum, wood floors - the heating cable should be flooded with a layer of self-leveling screed with a minimum thickness of 15 mm. For these floors, the wattage should not exceed 100 W/m², and the cable is recommended to be laid at 120 mm intervals. It is also necessary to provide control with a thermostat with a floor temperature sensor, limited to 27 - 28°C.
• On wooden OSB - On wooden OSB, first apply a layer of cement-based adhesive with a minimum thickness of 2 mm. Once the glue has dried, continue the installation according to the above instructions for the type of floor finish you have chosen.
• In anhydrite or self-levelling screed - a cable with this heating power works best in screeds 15 - 30 mm thick.

Package contents:

• Packaging with easy unwinding system.
• Heating cable.
• NRG-DM floor thermostat, wired floor temperature sensor (optional according to the selected variant).
• Hot melt adhesive.
• Floor temperature sensor installation pipe.
• Brass pipe cap.
• Instruction manual with acceptance protocol.
• Information sticker.

Don't miss the opportunity! Choose a promotional set with NRG-DM thermostat, which is very popular among our customers.

• Intelligent control - The RAYCHEM NRG-DM thermostat controls electric underfloor heating, ensuring maximum comfort with minimum energy consumption.
• Versatile modes - Allows operation in three modes:
• Constant Mode - Maintains one constant temperature, which can be easily changed using the + or - buttons.
• Event Mode (Interval Mode) - Operates according to a weekly schedule, minimizing energy consumption.
• Boost Mode - Allows you to temporarily raise the temperature, then returns to the last mode.
• Advanced Sensors - Equipped with an ambient and floor temperature sensor, it offers 4 different control modes depending on the user's needs.
• Large LCD display - Clear screen with blue backlighting (100 x 64 pixels) allows easy reading and adjustment of settings.
• Adaptive function - The thermostat calculates when to start heating to reach the desired temperature, saving energy.
• Child lock - Protects against accidental changes to thermostat settings.
• Display personalization - Customize the information displayed, such as the set temperature, actual temperature, time and date, and turn the screen saver on or off.
• Energy monitoring - Visualizes energy consumption at various times, enabling control and savings.
• Temperature calibration - Adjusts to the specific floor construction in the room.
• Protection for sensitive floors - Temperature scale with the ability to limit the thermostat to Min-Max values, ideal for wood and linoleum floors.
• Multilingual software - Operation in 12 languages, including Polish, English, German and French.