Add products by adding codes
EcoLeak ECO-10-25 - Water Leak Detection Kit with 25 m Wired Sensor, Relays x 2
EcoLeak Eco-1 zone water leakage detection alarm panel under which a water leakage detection sensor cable with a maximum length of 30 meters can be connected. This is a simple yet professional Eco-1 single zone alarm panel which contains two relays. One responds to "Leak" and can be connected to a solenoid valve, pump or siren, the other activates in case of a fault / break in the circuit.
SIMPLE OPERATION
LEDs on the front panel indicate power, leakage alarm and wire break. In the event of a leak or fault, the alarm sounds and the corresponding LED lights up. The operator silences the audible alarm by pressing the MUTE button. After silencing the alarm, the "Leak" or "Cable break" LED will continue to light. Once the cause of the alarm has been located and removed, the panel can be reset and the corresponding LED will go out. Resetting the panel also resets the voltage-free contacts of the alarm relay. The Eco-1 also has an "automatic reset" function. If enabled, it will allow the panel to reset itself after a leak or fault has been corrected. Any loss of system integrity, due to a power or sensor circuit break, will trigger the "Break / Fault" relay.
CONSTRUCTION
The Eco-1's compact housing can be easily mounted on a wall. It provides visual and audible indications for small applications. External device connectivity is provided by two potential-free "Leak" and "Failure/Fault" relays. These can be used to connect to local solenoid valves, BMS or other remote monitoring systems. A remote alarm panel (AT-RAP) can be added to the system to signal alarms in separate locations such as reception areas and security rooms.
APPLICATIONS
Eco-1 is ideal for projects where cost-effective leak detection and signaling solutions are required, such as smaller commercial areas or individual residential properties. Suitable areas include: elevator shafts, basements, storage technical rooms, tanks and pumping stations, kitchens, bathrooms, toilets, utility rooms and risers.
SCHEME
CONSTRUCTION
- Connection of the sensor cable detecting water.
- Voltage-free relay - leakage.
- Voltage free relay - fault.
- 230 V AC power supply.
- T500mA 250 V fuse.
- Buzzer.
- Relay function selection.
- Auto reset jumper.
Wired sensor detects water along its entire length
The wire sensor/sensor cable detects water anywhere along its length. When used in conjunction with the Eco-1 zone control panel, the sensor cable detects a water leak, triggers an alarm and indicates the leak zone. The cable is available in kits of various lengths: from 1 to 30 meters.
Conductive polymer technology and fluoropolymer construction make the EcoLeak sensor cable mechanically robust and resistant to corrosion and abrasion. The cable is constructed of two sensor wires embedded in a fluoropolymer support rod. The alarm module continuously monitors the continuity of the sensor wire. The cable's design allows it to be dried within seconds after water is removed and reused.
Connection cable with a length of 20 meters
Each kit includes a 20-meter connection cable (gray) on one side terminated with a connector for connecting the sensor cable.
The water detection kit includes
- EcoLeak Eco-1 alarm panel.
- Sensor cable.
- Connection cable.
- Adhesive clips for attaching the sensor cable to the ground.
