Add products by adding codes
RAYCHEM Frostguard
( number of products: 19 )RAYCHEM Frostguard is a self-regulating, pre-terminated heating cable that simply attaches along or inside a pipe (metal or PVC), insulates it and connects it to a power source. A specially designed Frostguard-ECO thermostat is available for this system for additional energy savings. The cable is ready to use and comes with a 230 V plug.
- Designed for pipes: PVC, metal, stainless steel and copper.
- It protects against frost and thus against freezing.
- Despite its small size, the heating cable is very durable.
- It adjusts its heating power to the ambient temperature, so it automatically provides more power on colder days and less on warmer days, saving energy.
- Frostguard heating cables can also be used inside drinking water pipelines. They have Swedish approval for use with drinking water.
- Frostguard is a self-regulating cable that can cross and come into contact with each other without the risk of burning out.
State-of-the-art self-regulating technology in Frostguard pipe heating cable
Self-regulating heating cables deliver the right amount of heat exactly where it is needed. When the ambient temperature drops, the cable generates more heat. When the temperature rises, the amount of heat generated decreases.
- Safety - cables can be crossed without risk of overheating.
- Optimum energy consumption.
- Can be installed on PVC pipes.
- Heating power at 5°C on metal pipe 10 W/m.
- Heating power at 0°C in water 20 W/m.
- A - Low ambient temp = high heating power
- B - Moderate ambient temperature = low heating power
- C - High ambient temp. = almost zero heating power
Why buy Frostguard pipe heating cable?
Description | Heating cable with constant resistance | Self-regulating heating cable RAYCHEM Frostguard |
---|---|---|
Energy saving | ❌ | ✅ |
Can cross | ❌ | ✅ |
Installation on PVC, PE pipes | ❌ | ✅ |
Mounting on steel pipes | ✅ | ✅ |
Mounting on the outside of the pipe | ✅ | ✅ |
Mounting inside the pipe | ❌ | ✅ |
Additional thermostat needed | ✅ | optional |
Risk of burnout | ✅ | ❌ |
Failure rate | high | zero |
Mounting the cable outside or inside the pipe?
External mounting is much simpler but possible only for pipes to which we have access. Properly selected power heating cable is enough to install one strand along the pipe and insulate.
The case is different when the pipe freezes in the wall or floor and we do not have access to it to attach the cable. There is also a solution for this. The heating cable is installed inside the pipe, it is inserted with a special pressure gland RAYCHEM ETL-GLAND-01 (to be bought separately). It is absolutely necessary for this purpose to use heating cables approved for installation inside pipes and for contact with drinking water, such as RAYCHEM Frostguard.
Insulation selection table for Frostguard heating cable
Installation location of the cable:
- A = cable laid in a pipe with water
- B = cable laid on a metal pipe
- C = cable laid on a plastic pipe
Insulation thickness | Ambient temperature | 20 mm pipe | 25 mm pipe | 32 mm pipe |
---|---|---|---|---|
without insulation | - 20°C | A | A | A |
without insulation | - 30°C | A | A | A |
20 mm | - 20°C | ABC | ABC | ABC |
20 mm | - 30°C | ABC | AB | A |
30 mm | - 20°C | ABC | ABC | ABC |
30 mm | - 30°C | ABC | AB | AB |
40 mm | - 20°C | ABC | ABC | ABC |
40 mm | - 30°C | ABC | ABC | ABC |
50 mm | - 20°C | ABC | ABC | ABC |
50 mm | - 30°C | ABC | ABC | ABC |
Available variants
Catalog number | Product symbol | Length | Heating power at 10°C | Protection | Residual current circuit breaker |
---|---|---|---|---|---|
928206-000 | FROSTGUARD-2M | 2 m | 24 W | B 10 A | 30 mA |
524628-000 | FROSTGUARD-4M | 4 m | 48 W | B 10 A | 30 mA |
845612-000 | FROSTGUARD-6M | 6 m | 72 W | B 10 A | 30 mA |
493074-000 | FROSTGUARD-8M | 8 m | 96 W | B 10 A | 30 mA |
641438-000 | FROSTGUARD-10M | 10 m | 120 W | B 10 A | 30 mA |
108722-000 | FROSTGUARD-13M | 13 m | 156 W | B 10 A | 30 mA |
924248-000 | FROSTGUARD-16M | 16 m | 192 W | B 10 A | 30 mA |
468683-000 | FROSTGUARD-19M | 19 m | 228 W | B 10 A | 30 mA |
107442-000 | FROSTGUARD-22M | 22 m | 264 W | B 10 A | 30 mA |
768868-000 | FROSTGUARD-25M | 25 m | 300 W | B 10 A | 30 mA |
Is an additional thermostat needed for the self-regulating cable?
Self-regulating heating kits RAYCHEM Frostguard do not require thermostats, nevertheless, to minimize electricity costs completely, a RYCHEM Frostguard-ECO socket thermostat can be used (to be purchased separately).The socket thermostat is designed for plug-ended heating cables mounted on and inside pipes.
Frostguard-ECO is compatible with the cables we offer. Why should you opt for it? Because it guarantees you that the system will work only when needed to protect the pipeline. This solution will allow you to save up to 80% of energy. Add this product to your cart, install it in your home and see for yourself!