nVent RAYCHEM AT-TS-13 thermostat with pipeline or ambient temperature measurement -5°C to +15°C
nVent RAYCHEM AT-TS-13 pipeline thermostat with temperature control in the range of -5°C to +15°C, designed for non-explosive zones. The temperature setting can be checked through a window located in the housing age.
It comes with an NTC temperature sensor on a 3-meter-long cable, which can be shortened when measuring ambient temperature. The temperature sensor cable can be extended up to 100 m with a 1.5 mm2 twin-core cable. If the sensor cables are laid in cable routes or near high voltage lines, the extension cables should be shielded. The cable shield should be grounded only on the controller side.
The thermostat has three LEDs to indicate the operation status:
- Green light - Heating wire power on
- Red light - Break in the sensor circuit
- Red light - Short circuit in the sensor circuit
Brand
Symbol
AT-TS-13
Producer code
5017455006452
Warranty
Measurement accuracy
± 1 K at 5°C (calibration point)
Switching hysteresis
0.6 to 1 K
Maximum operating temperature
+40°C
Relay
SPST (normally open)
Power supply
230 V AC
Minimum operating temperature
-20°C
Certifications and approvals
CE
EN 60730-1
EN 60730-2-9
Terminals
Screw 2.5 mm²
Housing
Temperature change
Inside the case
Operating temperature
-20°C / +50°C
Protection class
IP 65 to EN 60529
Holes for cable glands
1 x M20 for power cable (Ø 8-13 mm)
1 x M25 for heating cable (Ø 11-17 mm)
1 x M16 for the sensor
Material
ABS
LED indicators
Attached heating cable power supply (green)
Break in the sensor circuit (red)
Short circuit in the sensor circuit (red)
Sensor
Type
PTC KTY 83-110
Max. thermal resistance of the sensor cable
80°C
Sensor cable material
PVC
Sensor diameter
6.5 mm
Wire diameter
5.5 mm
Cable length
3 m
Write your opinion
